manualshive.com logo in svg

Commander comset T16, Инструкция по эксплуатации для пользователя

Поделиться
Скачать
Commander comset T16 Скачать руководство пользователя страница 15

 Opemting Instructions for Users

1.9.5
1.9.5.1

FACILITY DESCRIPTIONS AND OPERATIONS
Symbol Definitions

Throughout this section the following symbols are used to relate procedures to specific types of
instruments:

 related to “Standard” Key telephone stations 

 and 

 related to “Comset Handsfree” stations 

 also referred to as T16

 

Procedures related to “Comset On-Hook Dialling” stations 

 also referred

 

Procedures relating to decadic 2-wire stations

 

 P

 that are valid for the 

  8 2 4

Procedures that are valid for the S824

Note: The Comset On-Hook Station (T8) will only operate on 

 fitted with issue 

 or later

software. All production S824 have the T8 compatible software.

1.9.5.2

Internal Communication

 

 

 

8

2

4

Station to station communication is initiated in the off-hook state, by pressing the ‘I’
key followed by the two digit station number. The dialled station receives internal ring
signal and the initiator receives the “link-made” tone. The physical link is established

the rung party picks up the handset.

Station to station communication is initiated in the on/off-hook state, by pressing the
allocated key position on the DSS panel. The dialled station receives internal ring signal
and the initiator receives the “link-made” (single burst) tone. The physical link is
established when the rung party picks up the handset, or presses the ‘SPKR’ key.

 

  8 2 4

The station (B) also receives a visual indication of which station is initiating the call,
by a fast flashing LED signal of the calling party (A). At all other Comset stations,
the (B) party LED is on fast flashing sequence, while (A) party LED is steady on.

If required station has been programmed as a DSS appearance, then the procedure
is as above. For access to all other stations the procedure is initiated by pressing the
“I” key followed by the two digit station number.

 

  8 2 4

Station to station communication is initiated in the on/off-hook state, by pressing the
‘I’ key followed by the two digit station number. The dialled station receives internal
ring signal and the initiator receives the “link-made” tone. The physical link is established
when the rung party picks up the handset. Note that the T8 user must lift-off the handset
to communicate (i.e. no “handsfree” operation).

 

 

 

8

2

4

An internal call is established by lifting-off and dialling   followed by the two digit
station number. If the called station is free, the two-wire station receives the “link-made”
tone.

The link is disconnected by either party replacing their handset or at a COMSET by pressing the ‘Rel’
key or ‘Spkr’ (during the on-hook mode). At this time the other party receives busy tone.

l-22

Issue 2

With 

Compliments 

Absolute 

Phone 

& 

Data

Содержание comset T16


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды