Geneml:
Instructions
Users
1.9.5.3
Internal Conference
Up to 5 stations can be included in an internal conference: four stations directly, and the fifth via the
knocking procedure.
The called station joins the conference when its handset is lifted. Conference is terminated by the
subscribers replacing their handsets to on-hook.
If requested station is busy then the conference link receives the “short” busy tone sequence. Note
that automatic knocking does not occur. If a requested station does not answer before the “Transfer
time” (as programmed in the Customer Data) then the call is released. Stations already connected will
receive a warning tone to indicate that another party is about to join the conference.
8
2
4
To build up conference connection, any of the parties already connected in an internal
call simply need to press ‘I’, and the two digit number of the required station.
To build up a conference connection, any of the parties already connected in an internal
simply need to press the
key allocated to the required station.
Fast flashing of the station LED’s indicate which stations are required for the internal
When the station joins the conference that station LED (at all Comsets) goes
to the steady on state.
If the required
has been programmed as a DSS appearance then the procedure
is as above. Otherwise, press “I” and the two digit station number.
8
2
4
To build up a conference connection, standard telephones users simply need to dial
digit 9, followed by the two digit number of the required station.
l-23
Issue 2
With
Compliments
Absolute
Phone
&
Data
