The diagram shows telephone devices connected to the CS8500-t for a telephone system. Follow the same
procedures if you have a mini-telephone system in your home or small office. For the CS8500-t to operate
properly, it must be "in front" of the telephone system. In other words, it must connect directly to the
incoming telephone line. Connect the other equipment as previously shown.
NOTE:
All equipment on that line (KSU/PBX, TTY/TDD, FAX) must be connected directly to the
CS8500-t.
CAUTION:
You should be familiar with telephone wiring to complete this installation. If you have any
questions or are not confident that you can complete this installation procedure, contact a professional
installer. For further help, contact Customer Service at (TTY/TDD) 1-888-323-0714 or 303-873-7477,
(VOICE) 1-800-288-6794, M-F 7-5 MST., or (FAX) 303-792-0855.
Do not plug the CS8500-t into a telephone system phone jack. You may damage your telephone
system.
Using the CS8500-t
In this section, there are special operating notes you should read before operating the CS8500-t. The
section following these Operating Notes provides an overview of the CS8500-t standard operations and
instructions for answering and transferring your incoming calls.
CS8500-t Operator’s Guide
10
