User Manual
SW-81VA-2
COMM-TEC GMBH
SIEMENSSTRASSE 14
T49(0)7161/3000-0
WWW.COMM-TEC.DE
D-73066 UHINGEN
T49(0)7161/3000-333
Note:
Autosequencing, Autoswitching and RGB Mute are disabled
if the command is :
- repeated,
- another command is sent or if a
- pushbutton on the front panel is pressed.
In the latter case the input will be routed relative to the pushbutton pressed.
9.0 CASCADE Function and Settings
Up to four SW-81VA-2 can be cascaded in series in order to achieve a
29-In 1-Out Switcher.
Note:
In the CASCADE function the banwidth and other
technical specifications can be affected.
The output of unit#1 must be connected to the input #1 of the second SW-81VA-2
and so on.
You must link all units by daisy chain the RCA LINK connectors at the rear panel
with the appropriate number of cables terminated with RCA plugs.
The CASCADE mode is enabled by DIP-Switches accessible on the backside of the
unit. Each unit must be indentified in the chain by the appropriate DIP-Switch
setting as indicated in the table and the drawing below.
DIP
Switch
Function
Unit #1
Unit #2
Unit #3
Unit #4
#1
Cascade
ON
ON
ON
ON
#2
IN 01 - 08
ON
OFF
OFF
OFF
#3
IN 09 - 15
OFF
ON
OFF
OFF
#4
IN 16 - 22
OFF
OFF
ON
OFF
#5
IN 23 - 29
OFF
OFF
OFF
ON
#6
IR Reception
