INST
ALLA
TION
POWER UP
SETUP
USAGE GUIDE
ADV
ANCED MENUS
INST
ALLA
TION
POWER UP
SETUP
USAGE GUIDE
ADV
ANCED MENUS
18
19
u
sIng
the
t
herMostat
u
sIng
the
t
herMostat
t
emPorary
P
rogram
o
VerriDe
This feature will override the program temperature setting until the next program
period begins. Touch or
keys to adjust the temperature. The display will indicate
“
Temporary Hold At”
to the left of the set-point temperature. To cancel the temporary
setting before the next period begins, touch
Run Schedule
to return to the program.
Example: If you turn up the heat during the Morning program, it will remain at the new
temperature until the time for the next program period (Day).
P
ermanent
t
emPerature
h
olD
The Permanent Temperature Hold feature bypasses the program and allows you to
adjust the temperature manually as needed. The temperature you set in HOLD will
be maintained indefinitely. Touch
Run Schedule
to cancel HOLD and resume the
programmed schedule.
Touch or
keys to adjust the temperature. The
Hold
key will appear on the screen.
Touch the
Hold
key to maintain the new set-point temperature. ”
Hold At”
will display to
the left of the temperature set-point. To cancel the permanent hold setting at any time
and return to the program, touch
Run Schedule
.
Example: If you turn up the heat during the morning program and touch the
Hold
key,
it will remain at the new temperature until you touch
Run Schedule
or you manually
adjust to another temperature.
n
on
-P
rogrammaBle
m
oDe
If Program days per week is set for 0 Days (Non-programmable) in the Thermostat
Options Configuration Menu, the thermostat will not follow any program periods. Touch
the
SYSTEM
key to select
Heat
or
Cool
and use the
or
buttons to adjust the
temperature to your desired setting. After selecting your desired settings you can also
touch the
SYSTEM
key to select
AUTO
to allow the thermostat to automatically change
between Heat and Cool. If the
SYSTEM
key is touched to select
Auto
the thermostat will
change to Heat or Cool, whichever ran last. If it switches to heat but you want cool, or it
changes to cool but you want heat, touch both or
keys simultaneously to change
to the other mode.
C
hooSe
the
fan S
etting
(a
uto
or
o
n
)
FAN Auto
is the most commonly selected setting and runs the fan automatically when
the heating or cooling system is on during a program period.
Fan On
selection runs the fan continuously for increased air circulation or to allow
additional air cleaning. When
FAN
is selected
On
, it will run at the speed selected in the
Thermostat Options Configuration Menu.
Fan Prog
- When a period that has
FAN Prog
in the program begins, the fan will turn on
and stay on during the complete period. The display will show
FAN On Prog.
C
heCK
S
yStem
S
tatuS
If the Home Screen Display indicates “
Call
for Service
” and “
Check <Equipment
Name>
” in the scrolling message area, there
is a fault in the system. When this message
is displayed, contact your heating and
cooling service contractor or the installing
contractor for service.
m
aintenanCe
r
eminDer
m
eSSage
A reminder will display in the scrolling
message area when it is time for accessory
maintenance if selected in the Thermostat
Options Configuration Menu. When a
reminder appears, it can be cleared by
touching the
Clean Display
key. This will
also reset the timer to begin a new time
period for the reminder.
Air Filter Maintenance
- When the system
has run for the selected length of time, the
scrolling message area will show “
CHANGE
FILTER”
.
