14
INSTALLATION & USE
www.comfortcompany.com
INSTALLATION (ADDING A LINK TO PT HARDWARE)
BodiLink
®
PT Hardware Extra 2”, 3”, and 4” Links.
Taper inserts may be oriented so screws face either left or right.
1
Remove screw
A
and safety washer
B
from taper insert
C
. Separate link
D
and ball link
E
.
2
Align new link
F
with link
D
.
3
Place existing taper insert
C
halves (countersunk side first) in end of link
D
making sure the square
ends are aligned inside for a low-profile fit in the joint. Countersunk side of all taper inserts
C
should consistently face the same direction on hardware so that screws
A
are all on the same side.
4
Insert
screw
A
and safety washer
B
into countersunk side of taper insert
C
and tighten. Hold the
threaded side of taper insert
C
firmly while fastening.
5
Align new link
F
joint with ball link
E
.
6
Place new taper insert
G
halves (countersunk side first) in the end of ball link
E
making sure the
square ends are aligned inside for a low-profile fit in the joint.
7
Insert
screw
H
and safety washer
J
into countersunk side of taper insert
G
and tighten. Hold the
threaded side of taper insert firmly while fastening.
F
D
D
F
A
A
A
B
B
B
C
C
C
E
E
E
