Comfort Bilt HP55, Руководство оператора

Страница: 7 / 36

Operator’s Manual
HP55 Pellet Stove
~ 7 ~
INTRODUCTION
Congratulations on your investment in quality. Thank
you for your purchase on a comfortbilt stove from
S.M.G, Inc. The HP55 comply with the ASTM E1509,
(UM) 84-HUD, ULC/ORD-C-1482.
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with 2020 particulate emission
standards using pellet fuel.
We have worked to ensure that this pellet stove meets the
highest standards for usability and durability. With proper care,
your stove will provide many years of dependable service.
Please read entire manual before installation and use.
BURNING
P
ELLET
FU
EL
Ashes need to be removed from the stove periodically. See
Normal Care &Maintenance section for cleaning procedure.
Due to the nature of pellet fuels, this stove will require
attention periodically. Regular cleaning is an important part
of burning pellet fuel.
PELLETS
•
This pellet stove is designed and approved to burn wood
pellets, that comply with pellet fuels industry standards.
Minimum of 40 lbs. density per cubic feet, 1/4 to 5/16 in
diameter, with a maximum length of 1-1/2, and less than 1%
ash.
Pellet fuel quality can greatly fluctuate. The unit was
tested with premium grade pellets. You cannot use a
lesser grade, but higher grades can be used.
Do Not Burn:
1.Garbage;
2.Lawn clippings or yard waste;
3.Materials containing rubber, including tires;
3.Materials containing plastic;
4.Waste petroleum products, paints or paint thinners,
or asphalt products;
5.Materials containing asbestos;
6.Construction or demolition debris;
7.Railroad ties or pressure-treated wood;
8.Manure or animal remains;
9.Paper products, cardboard, plywood, or
particleboard. The prohibition against burning these
materials does not prohibit the use of fire starters
made from paper, cardboard, saw dust, wax and
similar substances for the purpose of starting a fire in
an affected wood heater.
Burning these materials may result in release of toxic
fumes or render the heater ineffective and cause
smoke.
•
The performance of your pellet stove is greatly affected
by the type and quality of wood pellets. As the heat output of
various quality wood pellets differ, so will the performance
and heat output of the pellet stove.
•
Wood pellets are generally produced out of wood waste such
as sawdust and shavings. The raw material is dried,
mechanically fractioned to size and extruded into pellets
under high pressure. Wood pellets need to be protected from
direct exposure to water. Water from sources such as
condensation and humidity causes pellets to expand and
break down into unusable fuel. Keep fuel dry.
•
It is important to select and use only pellets that are dry
and free from dirt and debris. Dirty fuel will adversely affect the
operation and performance of the unit and will void the
warranty. The Pellet Fuel Institute (PFI) has established
standards for wood pellet manufacturers. Only use pellets that
meet or exceed PFI standards for premium fuels.
CLINKERS
•
Impurities, such as silica (clinkers), will need to be regularly
cleaned and removed from the pellet stove. Clinkers will form
a hard mass and block airflow through the pot liner. High
quality fuels will result in fewer clinkers
WARNING
IF THE ELECTRICAL POWER FAILS ANY TIME
WHEN THE STOVE IS HOT, KEEP ALL STOVE
DOORS CLOSED. THE AUTOMATIC SAFETY
FEATURES MUST NOT BE BYPASSED.
WARNING
BURNING WOOD PELLETS ACCORDING TO
RECOMMENDATIONS WILL ASSURE LONGER
STOVE LIFE AND LESS FUEL RELATED
PROBLEMS.
THE USE OF GRATES OR OTHER METHODS OF
SUPPORTING THE FUEL IN THIS STOVE IS
PROHIBITED AND WILL VOID ALL WARRANTIES