Comfort Bilt HP55, Руководство оператора

Страница: 13 / 36

Operator’s Manual
HP55 Pellet Stove
~ 13 ~
Ventin
g t
h
e P
ellet
S
tove:
● D
o
not install flu
e
damper in th
e
exhaust venting
syste
m of
thi
s
unit
● Use an approved wall thimbl
e
whe
n
passin
g
the
vent through walls. Use a ceiling support/fir
e
st
op
spacer whe
n
passin
g
the vent throu
gh
ceilings (make sure t
o
maintain clearance t
o a
ny combustibles.)
●
if
using mor
e
tha
n
one te
e
and 180° of elbows, you
must use 4 “ venting pipes.
NOTE: In order to achieve optimum performance, it
is recommended that you keep the vent as short as
possible, especially in regards to the horizontal run.
The vent must have a support bracket every 5 ‘of pellet
vent when on the exterior of the structure.
The vent height and run must not exceed the distance as
illustrated in the diagram below.
Venting into this(the lighter)shaded area any require
combustion motor voltage adjustments and/or inlet air
adjustments(intake). SEE FIGURE 9.
INTAKE & EXHAUST POSITIONS
F
igure
8: Intake and exhaust positions