Comestero Group RR6 HD PRO, Быстрое руководство

Страница: 32 / 88

WorldKey UltraLite - My RR6 HD PRO | Quick Guide
32
7.1.4 Clone Programming Key
The Clone programming key is a special contactless key the same colour and with the
same storage capacity as the programming key, able to clone the configuration
present on a device transferring that configuration onto other devices without using PC
software. The key is delivered without the application or the safety codes; for use,
The key is delivered without the application or the safety codes; for use, The key is delivered without the application or the safety codes; for use,
The key is delivered without the application or the safety codes; for use,
please refer to the UNICO software guide.
please refer to the UNICO software guide. please refer to the UNICO software guide.
please refer to the UNICO software guide.
7.1.4 Firmware update
It is possible to update the operating firmware of the WorldKey UltraLite using the PC
with the connection cable via USB.
7.2 Data collection through IRDA interface (only for My RR6 HD PRO)
The My RR6 HD PRO has an infrared signal transceiver on its front, referred to as the
IR interface. The IR interface may be used to read audit data in EVA DTS format with a
palm top device that has a display on which to view the data (available as an option).
To receive the data flow sent via infrared, hold the palm top close to the transmitter on
the front of the changegiver and the data will be received either automatically or,
depending on the type of palm top, when you press a button on the device.
The maximum distance for receiving data correctly is 80 cm.
The maximum distance for receiving data correctly is 80 cm. The maximum distance for receiving data correctly is 80 cm. The maximum distance for receiving data correctly is 80 cm.
8. Care and maintenance
All the maintenance operations performed on the device must be
completed while the device is unplugged from the power supply.
Follow the warnings carefully so that the machine is always in the best
operating conditions, preventing dangerous situations or situations
which would render the warranty null and void.
8.1 External maintenance and cleaning
Clean the exterior surface of the device: use a damp cloth with water or a mild
detergent solution. Do not use aggressive solvents, detergents or abrasive sponges
that could damage the machine. Do not immerge the device or expose it to direct
sprays of water or of other liquid of any nature. Periodically check the state of the
machine’s surfaces paying special attention to the areas which, in normal operating
conditions or through malice, could be hazardous for the user.
Consult Comesterogroup for further information.