COMELZ COM52, Инструкция по эксплуатации, Страница: 13 / 18

COMELZ_ITALIA
COM52-INGL

13
8.6.5.1 Creaser foot, pictures 11, 12 and 13
Adjust the position of the creaser foot by means of the
directional buttons T3-T4-T5-T6:
•
Adjust the foot vertically, leaving a clearance of
approximately 0,5 mm from the work release arm
when this is in its higher position.
•
Adjust the creaser foot horizontally, aligning it to the
right corner of the work release arm.
8.6.5.2 Guide, pictures 12 and 13
Adjust the position of the guide by means of the
directional buttons T7-T8-T9-T10:
•
Adjust the guide vertically to obtain the required folding
width.
•
Adjust the guide horizontally to obtain a gap between
the guide and the cutting block that is about double of
the thickness of the material being processed.
8.6.5.3 Lip turner, pictures 12, 13
Turn the pulley by hand to move the lip turner
all the way up.
Through direction buttons T11-T12 adjust the
lip turner approximately 1 mm away from the
creaser foot.
Curve correction
T13 – To adjust the horizontal movement of
the lip turner while folding corners, to
compensate the width of the folding. Press
repeatedly to select.
D4 – They show the value of the set
correction.
No light on indicates that the correction is
excluded.
Picture 12
Picture 13