COMELZ COM52, Инструкция по эксплуатации, Страница: 10 / 18

COMELZ_ITALIA
COM52-INGL

10
The machine can store in memory the parameters for 99 types of
folding.
When the machine is turned on, the D5 display shows a number
that indicates the selected folding style.
T14 and T15 - To select one recorded folding style.
D5 - It shows the selected folding style.
Memorized parameters
For each of the 99 folding styles the machine stores in memory the
data input received from the touch-pad, from the following sections:
•
Cement (except overall temperature)
•
Feed rate: outside corners, straight edges, inside corners
•
Photocells
•
Folding members: creaser foot, width guide, lip turner
•
Operation mode: feed, cement, creaser foot, knife
8.6.2 CEMENT, picture 8.
8.6.2.1 Pot temperature
T16 - To select the cement pot temperature.
Press repeatedly to select.
Standard temperature is 140 degrees C.
D8 - It shows the pre-set temperature.
D6- It shows the actual pot temperature.
The setting of this parameter is generally
valid for all recorded folding styles.
8.6.2.2 Creaser foot temperature
T17-T18 - To adjust the temperature of the
cement spreading foot.
D7 - They show the pre-set temperature.
Standard adjustment is obtained with 2 - 4
lights on.
8.6.2.3 Flow rate
T19-T20 - To adjust the quantity of cement.
D9 - They show the pre-set quantity.
Standard adjustment is obtained with 3 - 5
lights on.
8.6.2.4 Delay
T21-T22 - To delay the start of cement
application, when required, leaving a dry bit at
the start.
D10 - It shows the pre-set delay.
No light on indicates no delay.
Each light on indicates one turn without cement application.
Picture 7