COMELZ COM52, Инструкция по эксплуатации, Страница: 12 / 18

COMELZ_ITALIA
COM52-INGL

12
the knife are started also while folding ample corners, whereas the selection of segments on top makes the
adjustments only in correspondingly tighter corners.
Generally, select bottom D2 lights when processing rigid materials and top D2 lights when processing soft
materials.
The operator can override and activate the knife at any time, by heeling on the left pedal.
8.6.4.3 Feed pitch
T1 – It defines the amplitude of outside corners, by selecting which photocell starts the adjustment of feed
parameters for outside corners. Press repeatedly to select.
D3 - They indicate the selected photocell.
•
All D3 lights off. The adjustment of feed parameters for outside corners is excluded.
The operator makes the feed pitch reduction active by pressing the right pedal with the toe.
•
One of the D3 lights is on. When the material uncovers the selected photocell, the adjustment of feed
parameters for outside corners is made active.
When the rightmost D3 light is selected, the adjustment of feed parameters for outside corners is started also
while folding ample corners, whereas the selection of segments on the left makes the adjustments only in
correspondingly tighter corners.
Generally, when processing work-pieces that do not require feed pitch reduction, it is preferable to adjust the
machine with all light off.
The operator can override and activate feed pitch reduction at any time by pressing the right pedal with the
toe.
8.6.5 FOLDING MEMBERS, picture 11
Picture 11