35
SCHEDULE: this setup function allows you to create a schedule for recording tasks
throughout the week, so that only certain selected events are actually recorded on the HDD.
For example, you may set up the system to record non-stop throughout the business hours,
making it an alarm-triggered recoding at lunch time (that means no recording will be performed
unless an alarm event happens), night time being set to motion detection recording with certain
hours made more secure with the combined alarm and motion detection triggered recording,
finally making it more sophisticated by specifically setting a no-record time slot when you
usually stay in the office alone at the wee hours of weekday mornings. You can setup schedule
as you want.
Please note that manual recording overrides all record settings and will be carried on until
stopped by the operator.
CHANNEL: You can select all channels or
just one channel.
There are three modes for recording: MD,
SENSOR, NORMAL and NO RECORD.
Different colors signify different recording
modes: Red means alarm record, green
means normal record, grounding means no
record, orange means MD record.
To set up weekly schedules, click on the
box of the recording status you want (Alarm,
Normal or No record) and then click on
each box in the schedule time line that you want this method to apply to. Also you can left click
to drag the frames on boxes in the schedule time line that you want to. You can use the
[FROM-TO] pull-down menus and COPY button settings to repeat setting from one day to
another day or all days.
After you complete the schedule you activate it by clicking the [
] button.
Scroll to
and press enter to restore to default settings.
Scroll to
and press ENTER to save the new settings.
5.4 Video
Move the cursor to [VIDEO] (the icon will be highlighted when selected). Press [Enter] to enter
the setting interface. You can use the direction keys and cursor to change the options.
When you select the option of alarm recording, in order for the actual
recording to happen, it is necessary to set the motion detection sensitivity
and area. Please refer to Section
5.6.7 Motion Detect
for details. When
alarm recording is selected, please set the alarm triggering settings
beforehand.
