34
5.3.2 Record
“ENABLE” indicates that the channel is enabled
for recording.
5.3.3 Bit-rate
There are three options: GOOD, NORMAL and
LOW, corresponding to HIGHEST, HIGH and
NORMAL data stream standard. The bit rate of each channel for recording can be adjusted
independently.
5.3.4 Resolution
It indicates the setup resolution and code rate for recording. There are three options: D1,
Half-D1 and CIF resolution. The resolution of each channel for recording can be adjusted
independently.
5.3.5 Frame Rate
In this section you can choose the recording frame rate (frames per second) for current channel.
The higher the record frame rate, the more natural movement you will see in playback mode.
Make your choice depending on the precision with which you want to follow the events
unfolding before your cameras. It is possible to adjust each channel frame rate independently.
For PAL video output format, the default value of the system’s resolution is CIF and the default
value of the system’s frame rate is 25 frames per second with each channel, which means the
system, will record 100 frames per second with all channels. User can set frame rate from 1 to
25 frames per second for each channel. The maximum value of total frames per second with all
channels is 200 frames with CIF resolution for 4ch or 8ch and 400 frames with CIF resolution
for 16ch.
For NTSC video output format, the default value of the system’s resolution is CIF and the
default value of the system’s frame rate is 30 frames per second for each channel, which means
the system, will record 120 frames per second with all channels. User can set frame rate from 1
to 30 frames per second for each channel. The maximum value of total frames per second with
all channels is 240 frames with CIF resolution with 4ch or 8ch and 480 frames with CIF
resolution for 16ch.
5.3.6 Audio
“OPEN” indicates that the audio recording for all channels is enabled; “CLOSE” indicates that
audio recording is disabled.
5.3.7 Pack Time
There are four options: 15min, 30min, 45min, and 60minutes. It will pack as the mode you
selected when alarm record is disabled.
5.3.8 Record Mode
Record mode includes two options: “ALWAYS” and “SCHEDULE”.
ALWAYS: indicates that the device will start recording when it starts up.
