20
(depending on devise).
AUTO SEQUENCE: click “AUTO SEQUENCE” on the tool bar to enable auto
sequencing, the channels with images will be in sequence: channel 1-channel 2-channel
3-channel 4-channel 1…… (4-CH DVR) / channel 1-channel 2-channel 3-channel 4-channel
5-channel 6-channel 7-channel 8-channel 1…… (8-CH DVR) /channel 1-channel 2-channel
3-channel 4-……-channel 14-channel 15-channel 16-channel 1…… (16-CH DVR).
Channels without images won’t display. To interrupt auto sequencing, press any button or click
the mouse while in auto sequence mode.
EZOOM: click “EZOOM” to enter into zoom mode, and then click left key and drag to
select the area that you want to magnify. Right click to exit.
PIP 1*1: this feature displays a small picture in a full screen.
PIP 1*2: this feature displays two small pictures in a full screen.
VO SWITCH: press the button [ ], [
]
or numerical button [
] ten times when
there is no tool bar or click the button “VO SWITCH” on the tool bar to switch the main menu
between BNC video output and VGA video output.
See the following subsections for a detailed description of each of these functionalities.
4.2 Tool Bar Menu Options
4.2.1 System Configuration
Pressing this button will bring up a screen for setting up all system configurations. You
can adjust such settings as Record, Video, System, Network, Alarm and PTZ (optional).
Please refer to
Section 5. DVR
for the detailed description of these settings.
Note: in order to validate the sub-menu setting, you must press “
”. It will not be
effective if you do not press
and exit directly. This DVR has a special feature:
explanation and information will be shown automatically when you move the cursor over the
Menu.
4.2.2 Manual Recording
There are three ways of recording live video/audio feed from your cameras: manual
recording, scheduled recording and always recording.
If the recording schedule is in conflict with manual recording, the manual recording will be
processed first until stopped.
For detailed description of time recording see
Section 5.3.8 Record Mode.
Description of the
manual recording function follows.
In order to record a video/audio feed, please select the Manual Record button in the Tool Menu.
Alternatively you can use the REC button on the remote or the front panel. Pressing this button
again will stop the recording process.
4.2.3 Video Playback
Move the cursor to
【
►
】
(the icon will be highlighted when selected) and left click to enter
