MT KIT 04
43
MT KIT 04
E
N
G
L
I
S
H
Setting telephone (optional) Art. 2610
To extend the BRAVO KIT system by adding the optional
Telephone Art. 2610, the table necessary for defining the
required Telephone functions is given below.
DIP 1
DIP 2
DIP3
DIP 4
Button 1 function Button 2 function
0
0
0
0
Generic actuator
Switchboard call
1
0
0
0
Switchboard call
Single-residence
Inter.
0
1
0
0
Switchboard call
Two-residence Inter.
1
1
0
0
Generic actuator
Single-residence
Inter.
0
0
1
0
Generic actuator Two-residence Inter.
1
0
1
0
Doctor
Switchboard call
0
1
1
0
Doctor
Generic actuator
1
1
1
0
Doctor
Single-residence
Inter.
0
0
0
1
Doctor
Two-residence Inter.
1
0
0
1
Single-residence
Inter.
Two-residence Inter.
0
1
0
1
Switchboard call
Automatic switch-on
1
1
0
1
Actuator
Automatic switch-on
0
0
1
1
Doctor
Automatic switch-on
1
0
1
1
Single-residence
Inter.
Automatic switch-on
0
1
1
1
Two-residence Inter. Automatic switch-on
2
ON
U4
4
3
1
1
3
2
5
4
7
6
9
8
P1
P2
Self Ignition
Function (only for systems with 1 or 2 inputs) on
monitor with brackets
Art. 5714/K
set as Main (see JP1 in the
Figure, in position P).
The Self Ignition function must be enabled.
Enabling/disabling
the Self Ignition function: to enable the
function it is necessary to keep pushbutton 2 of the monitor
pressed (pay attention to the BRAVO KIT mode set by means of
the programming DIP switches) for a time of more than
4 sec
.
When setting has taken place, by putting the receiver to your
ear, a double confirmation tone is heard.
To disable it, keep the same pushbutton pressed for a time of
more than 4 sec. In this case, by putting the receiver to your
ear, a single confirmation tone is heard.
Use
of self-ignition: the monitor lights up (if the function has
been enabled) by pressing and immediately releasing
Pushbutton 2.
Video Request
on monitor with brackets
Art. 5714/K
set as
Secondary (see JP1 in the Figure, in position S).
The Video request function does not require enabling.
It allows a monitor to be turned on
following a call from the
external unit for the user
.
Use
of the Video request function: the monitor lights up by
pressing and immediately releasing Pushbutton 2 (pay
attention to the BRAVO KIT mode set by means of the
programming DIP switches).
1
2
3
4
ON
5
6
7
8
DIP
JP1
1
2
3
4
5
6
2
Self Ignition and Video Request Function
1
2
3
4
ON
5
6
7
8
DIP
JP1
1
2
3
4
5
6
2
