Comelit HFX-7004M, Техническое руководство

Страница: 31 / 104

31
EN
5.3 SELF-IGNITION FUNCTION
5.2 PAGING CALL
5.2.1 How to initiate a paging call
f Press to initiate the all-page chime
» After the chime sounds, a 30 seconds message can be
broadcast to all monitors on the system (maximum 4
monitors).
5.2.2 How to answer a paging call
f Press to answer the paging call
» a (300 seconds) point to point conversation between the
two monitor is estabilished.
» the paging call will be terminated for the other devices.
√
Self-ignition is possible only when the system is in standby
f Press and release the self-ignition button ( by default) to
display on the monitor the video from the external unit.
f Press again to cycle through several cameras.
If a call is underway with an external unit it is NOT possible
to cycle between the external units.
Long press on key to enable / disable the function.
5.3.1 How to display on the monitor the image
transmitted from the CCTV camera
√
During “call in progress” or during Self-ignition.
f Press the programmed button to display on the monitor the
image transmitted from the CCTV camera.
f
Press again to cycle through several cameras and come
back to the external unit
1
2
cycle
MAIN
UNIT
UNIT 1 UNIT 2 UNIT 3
MAIN EXTERNAL
UNIT
CCTV
CAMERA
cycle
MAIN
UNIT
CAMERA 1 CAMERA 2 CAMERA 3
A call from the external unit always takes priority over an intercom communication or a paging call.
» the call in progress will be terminated for the other devices.