Comelit HFX-7004M, Техническое руководство

Страница: 22 / 104

22
EN
4.2.3.2 HOW TO PROGRAM THE INTERCOM FUNCTION
Example: key = general intercom to user code 3
√
Take note of the S1 setting and restore it when programming is complete
1 Enter programming mode
f
Set S2 DIP switch 5-6 to the combination 01
» the Privacy LED flashes
2 2.1 Choose the function: refer to “4.2.1 Preset functions table” on page 20 and select a S2
DIP switches combination in which the intercom function ( INT ) is listed for the keys you wish to
program.
Example: 0100
2.2 Addressing:
f for internal intercom set S1 DIP switches with the same user code of the internal unit.
f
for general intercom to another user code set S1 DIP switches with the desired address
in accordance with “TAB. A” on page 26.
3 Select the key to be associated with the function
f
Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4 Exit programming mode
f To exit programming mode, set S2 DIP switches 5-6 to the combination 00
» the Privacy LED switches off
5 When programming is complete,
f Set S2 DIP switches 1-2-3-4 to the combination 1111 ( PROG setting). In this DIP switch setting,
the keys control the programmed functions; the NON-programmed keys control functions
referred to on line 0000 (See “4.2.1 Preset functions table” on page 20 ).
f
Restore the user code setting on S1.
4.2.3.3 HOW TO PROGRAM THE PAGING FUNCTION
Example: key = general paging to user code 3
√
Take note of the S1 setting and restore it when programming is complete
1 Enter programming mode
f
Set S2 DIP switch 5-6 to the combination 01
» the Privacy LED flashes
2 2.1 Choose the function: refer to “4.2.1 Preset functions table” on page 20 and select a S2
DIP switches combination in which the paging function ( PAG ) is listed for the keys you wish to
program.
Example: 0100
2.2 Addressing:
f for internal paging set S1 DIP switches with the same user code of the internal unit.
f
for general paging to another user code set S1 DIP switches with the desired address in
accordance with “TAB. A” on page 26.
3 Select the key to be associated with the function
f Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4 Exit programming mode
f
To exit programming mode, set S2 DIP switches 5-6 to the combination 00
» the Privacy LED switches off
5 When programming is complete,
f
Set S2 DIP switches 1-2-3-4 to the combination 1111 ( PROG setting). In this DIP switch setting,
the keys control the programmed functions; the NON-programmed keys control functions
referred to on line 0000 (See “4.2.1 Preset functions table” on page 20 ).
f Restore the user code setting on S1.