30
EN
PROCEDURE
DISPLAY INFO
DESCRIPTION
Access con
fi
guration (see
page 23).
Select the menu
I
NFO
using the
key.
MAIN
INFO
Art. 3070/B
1.1
The menus are scrolled
through automatically
every 2 seconds.
Press the
key to exit
the menu.
Exit con
fi
guration (see
page 23).
This procedure can be used to view:
• the
fi
rmware version
• the number of users stored
[NOT VIP]
• the number of passwords stored
[NOT VIP]
• the RS485 address
[NOT VIP]
• the call mode
3. INFO
DATA MANAGEMENT USING 1249B (R.I. 003)
[NOT VIP]
ENTERING A LIST (DOWNLOAD)
Software Art.1249B (R.I. 003 - SW rev. 2.3 or higher) can be used to enter the
list with
Indirect Code
and
Code
fi
elds for INDIRECT CODE operating mode
on module 3070/B. 3070/B must be set to indirect code call mode (see "1.1.3.
Call mode").
INITIAL CONDITION
Module powered up in
standby mode.
ENTER
USER CODE
PROCEDURE
DISPLAY INFO
DESCRIPTION
Connect the cable
supplied with software
Art. 1249B (R.I. 003) to
terminals TX / RX / - (or
D / D- if you have an
RS485 line).
ENTER
USER CODE
Run software
Art. 1249B (R.I. 003).
ENTER
USER CODE
On software 1249B
with R.I. 003, the CALL
MODE must be set as
Indirect Code
without a name entry.
Make the list with the
Code and Indirect
Code entries in
software Art. 1249B
with R.I. 003, or load an
existing list.
ENTER
USER CODE
Press the
Download button in
software Art. 1249B
(R.I. 003).
DOWNLOADING...
COMPLETED
or:
DOWNLOADING...
ABORTED
If the download was
completed successfully.
If an error occurred during
the download.