Comelit 1998A, Руководство пользователя и техническое руководство

Страница: 19 / 22

19
device positioned underneath the LPin-LPin line of
switching device Art. 1424 as LP-IN .
For the PARALLEL switchboard, switching to NIGHT
and the DAY/NIGHT AUTOMATIC function is not
possible (see ”I3 - Day/night automatic mode” ).
A P should appear on the standby screen of the two
switchboards, indicating that the switchboard is
configured in parallel, in addition to the fixed icon .
3- If there are 2 main or secondary switchboards serving the
same riser, the SERIES configuration implies that only 1
of the 2 can be operative (MASTER switchboard), while
the other is deactivated (SLAVE switchboard) (see SBTOP
audio/video system ).
f Configure both switchboards as SERIES and the
active switchboard will, from time to time, be the one
set as MASTER. To change a switchboard from
MASTER to SLAVE and vice-versa, see “U21 How to
ACTIVATE (MASTER) or DEACTIVATE (SLAVE) the main
switchboards” page 13.
An S should appear on the standby screen of the two
switchboards, indicating that the switchboard is
configured in series, in addition to the fixed icon .
CAUTION!
» if flashes, it is indicating that the 2 switchboards are
not communicating correctly.
» if the icon ! appears, there is a configuration problem
with the 2 switchboards (e.g. both set as MASTER
or SLAVE, LP-IN or LS-IN, or one is SERIES and the
other PARALLEL).
» If, in a Simplebus TOP system (with switching devices
Art. 1424), both main and secondary switchboards are
installed (see SBTOP audio/video system ); for correct
system operation, it will be necessary to activate - on
all switchboards - the setting ”C8.7 - Function main
cps+sec (available from R.I.006)” .
How to configure a main switchboard
1. press the MENU key and use the keys to view the
8-ADVANCED OPTIONS menu, then press 8 ;
8-ADVANCED
OPTIONS
2. use the keys to display the 3-TYPE OF
SWITCHBOARD menu, then press 3 ;
3- TYPE OF
SWITCHBOARD
3. press 2 ;
1- SECONDARY
* 2- MAIN
The switchboard is configured as SINGLE CPS by default.
It is now possible to configure it as PARALLEL CPS or
SERIES CPS.
f
to configure it as 2-PARALLEL CPS , press 2 ;
1-SINGLE CPS
* 2- PARALLEL CPS
f to configure it as LS-LN , press 1 ,
to configure it as LP-LN , press 2 ;
1- LS-IN
2- LP-IN
f
to configure it as SERIES CPS, use the keys to
display the 3-SERIES CPS menu, then press 3 ;
* 3- SERIES CPS
f
to configure it as MASTER , press 1 ,
to configure it as SLAVE , press 2 ;
1- MASTER
2- SLAVE
How to configure a secondarya switchboard
1. press the MENU key and use the keys to view the
8-ADVANCED OPTIONS menu, then press 8 :
8-ADVANCED
OPTIONS
2. use the keys to display the 3-TYPE OF
SWITCHBOARD menu, then press 3 ;
3- TYPE OF
SWITCHBOARD
3. Press key 1 ;
* 1- SECONDARY
2- MAIN
The switchboard is configured as SINGLE CPS by default.
It is now possible to configure it as SERIES CPS, in fact
the
function 2-PARALLEL CPS IS NOT AVAILABLE;
* 1- SINGLE CPS
2- PARALLEL CPS
f
to configure it as SERIES CPS, use the keys to
display the 3-SERIES CPS menu, then press 3 ;
* 3- SERIES CPS
f
to configure it as MASTER , press 1 ; to configure it as
SLAVE , press 2 ;
1- MASTER
2- SLAVE
C8.4 - Self-ignition on/off (available from R.I.006)
This is disabled by default.
This function is only available for non-TOP Simplebus
systems and requires Art. 1259 for the cyclic displaying of
images from remote cameras.
This function can be used to activate or deactivate the self-
ignition transmitted by the internal units with the switchboard
in DAY mode.
To activate the function:
1. press the MENU key and use the keys to view the
8-ADVANCED OPTIONS menu, then press 8 ;
8-ADVANCED
OPTIONS
2. use the keys to view the 4 SELF-IGNITION ON/OFF
menu;
4-AUTO ACC.
INTERNA ON/OFF
3. press 4 to activate or deactivate the function;
SERVICE
ACTIVE
SERVICE
NON ACTIVE