18
C8.1 - Video mode configuration
(available from R.I.006)
This is disabled by default.
Activating this function will allow you to make a video call to
an internal unit. The monitor called by the switchboard will
switch on, making it possible to view, for example, the images
from the remote cameras connected to Art. 1259/A or Art.
1259C.
VIDEO mode can be
NORMAL
or
DIRECT
.
In
NORMAL
mode, the internal unit video feed begins when
the handset is lifted, or when the audio line is activated in
receipt of a call from the switchboard; in
DIRECT
mode, on
the other hand, it begins automatically on receipt of a call.
To activate the function:
1.
press the
MENU
key and use the
keys to view the
8-ADVANCED OPTIONS
menu, then press
8
;
8-ADVANCED
OPTIONS
1-VIDEO MODE
CONFIGURATION
2.
press
1
to activate or deactivate the function;
SERVICE
ACTIVE
SERVICE
NON ACTIVE
»
if the service has been activated, you will be asked to
select one of the 2 modes.
f
Press
1
for
NORMAL MODE
or
2
for
DIRECT MODE
;
*1- NORMAL MODE
2- DIRECT MODE
C8.2 - Calling mode (available from R.I.006)
This function can be used to select the manual switchboard
calling mode, from the 3 options available:
1- SIMPLEBUS CODE
(default), the call is made by entering
the code corresponding to each user.
• If the system is a Simplebus type, the door-entry
phone user is identified by a User Name field (optional)
and a Code field no longer than 3 digits (between 1
and 240).
EXAMPLE
: User name = Smith; Code = 015.
• If the system is a Simplebus TOP type, the door-
entry phone user is identified by the User Name field
(optional) and a Code field consisting of two parts:
zone field with no more than 3 digits (between 1
and 500) and a user field which must have 3 digits
(between 1 and 249).
EXAMPLE
: User name = Smith; Code = 25 015.
2- INDIRECT CODE
, (the call takes place by entering the
indirect code with 6 digits. This code must be stored in
the memory and associated with the user who has been
given a name (compulsory) and Simplebus or Simplebus
TOP code).
3- INDIRECT CODE WITHOUT NAME
, see previous mode;
the difference is that in this case the name field is not
compulsory. In this mode,
FILTER OFF
or
FILTER ON
will
be requested; if activated only named users will appear on
the display; however, if the filter is deactivated, all users
will be displayed.
To activate the function:
1.
press the
MENU
key and use the
keys to view the
8-ADVANCED OPTIONS
menu, then press
8
;
8-ADVANCED
OPTIONS
2.
use to view the
2-CALLING MODE
menu, then press
2
;
2-CALLING
MODE
3.
view the selected mode using the
, keys, then press
1
for the
SIMPLEBUS CODE
, press
2
for the
INDIRECT
CODE
or 3 for the
INDIRECT CODE WITHOUT NAME
;
*
1-SB CODE
2-INDIRECT CODE
3-INDIRECT CODE
WITHOUT NAME
if the
3-DIRECT CODE WITHOUT NAME
is selected,
filter activation is requested; press
1
to disable it, or
2
to
activate it;
*1-FILTER OFF
2-FILTER ON
C8.3 - Type of switchboard (Simplebus Top mode)
(available from R.I.006)
The switchboard may be SECONDARY or MAIN.
• Set
SECONDARY
when the switchboard is used as
SECONDARY, on the outgoing line from the LM-LM
terminals of switching device Art. 1424 (Simplebus
TOP system) (see
SBTOP audio/video system
); or
when the switchboard is used as MAIN, in Simplebus
systems with switching devices Art. 1224A or in a
system with a single riser and no switching devices.
CAUTION!
The SECONDARY switchboard cannot be
configured as a switchboard in PARALLEL.
• Set
MAIN
when the switchboard is used as MAIN in
SIMPLEBUS TOP
systems, then positioned in the first
section before the switching devices Art. 1424 which
mark out the zones/risers (see
SBTOP audio/video
system
).
The SECONDARY or MAIN switchboard must then be
configured as:
1- SINGLE
2- PARALLEL
3- SERIES.
1.
Select
SINGLE
when the switchboard is the only one in
the system, or the only one serving a specific riser.
2.
If there are 2 main or secondary control units serving the
same riser, the
PARALLEL
configuration implies that both
switchboards will be operative with the same functions
(see
SBTOP audio/video system
).
»
The first of the two to answer a call will preclude
the possibility of the other one performing the same
procedure.
»
If one of the 2 devices is switched on or off, the other
will automatically follow suit.
f
Configure both switchboards as PARALLEL and set
the switchboard connected underneath the LS-LS
line of the switching device Art. 1424 as
LS-IN
;set the
Содержание 1998A
Страница 1: ...EN TECHNICAL MANUAL Porter switchboard Art 1998A Passion Technology Design...
Страница 21: ...21...
