2. GENERAL TECHNICAL INFORMATION
• Supply 230 VAC- 50Hz included
• Data backup in EEPROM in case of power outage
• Visual and audible alarm for a functioning > 40 cm
(EN14175).
• PID control algorithm integrated
• Response time programmable by HMI.
• Terminals separated for an easy and quick connection
• Bus output for the networking with other products.
• Visual and audible alarm when the thresholds are exceeded.
• Alarm contact available
• Access code to parameters reconfigurable by the user
3. CHARACTERIsTICs
Supply .............................................................
230VAC – 50 HZ
Consumption ......................................................................10 VA
Safety class ..............................II (optional ground connection)
Protection......................................................
exchangeable fuse
Fuse intensity ..................................................................500Ma
3.1. Electrical Characteristics
INPUTs
Digital inputs .............................................
4x 0-5V/25mA TOR
OUTPUTs
Inverter control
....................................
0-2…10V / 0…10V (PID)
Voltage source ..................................
10V / 500mA permanent
Inverter run command contact
............................
5A / 230 VAC
Alarm contact ................................
1A/24VDC – 0.5A/230 VAC
Fume hood light contact ........................................
4A /250VAC
Sash lowering and raising contact ........................
4A /250VAC
COMMUNICATION
Bus CAN
...................................................................
250kbits/s
Protocol ...........................................................................
COMnet
Access process .......................................
Station / Multi-Master
Number of units .................................................................. 256.
Maximum length
..............................................................300m.
Kind of support .......................................................twisted pair.
sERVOMOTEUR
Operating time
........................................................................ 8s.
Shaft size
...................................
Ø10 à 20mm / □10 à 16mm.
Noise level during operation.............................................45dB.
Absorbed power..............................................................6 W
3.2. Nominal features
Velocity setpoint ................................................
0.1 à 0.99 m/s
Alarm response time ...
………………………………..5 à 30s. Temps
Hot wire response time
............ .................................. < 100ms
Sash lowering ......... ....................................................1 à 250s
Operating temperature
...................................... de 15 à 35°C.
4
