4.4 Controller setup
Elements included for the first installation:
• Controller Ecro-Rv.
• HCI VFC11
• Face velocity probe.
• RJ12/DIN cable for probe.
• RJ45/RJ45 connection cable.
• Frequency inverter or motorised damper
Optional :
• PIR presence sensor.
• Photoelectric barrier.
• Sash motorisation.
CAUTION : the electrical wiring must be done in accordance to the installation leaflet.
When the device is powered, the IMH VFC11 makes a long bip then the LCD display lits.
First, the display shows the version of software and the reference of the product.
Once the main screen is over, the installer will see, on the following screens, the default setting programmed by the manufacturer
-----COMELEC-----
----------
ECRO RV
VERSION 2012 V9
REACTION
SETPOINT = 50ms
VELOCITY
SETPOINT = 0.50
--NORMAL MODE--
----------
VELOCITY MODE
VC = 0.50....VR = 0.45
ALARM
SETPOINT = 30S
13
