manualshive.com logo in svg

Comdial DXP Digital Communications System, Инструкция для обслуживающего персонала, Страница: 53 / 174

Поделиться
Скачать
Comdial DXP Digital Communications System Скачать руководство пользователя страница 53

GCA70250

Attendant Manual

August, 03

Comdial

43

•  To identify the station that occupies a busy line,

1.  PRESS DSS/BLF button for busy line.
2.  READ your display for intercom number of station that is busy on 

line.

•  To identify the line that a busy station occupies,

1.  PRESS DSS/BLF button for busy station.
2.  READ your display for the busy station’s line number.

3.10  Executive Override

Overriding A Call Or A Do Not Disturb Condition At 
Another Telephone

You can override a call in progress or a Do Not Disturb condition at 
another telephone if the system installer has enabled the executive 
override feature at your telephone. (If the feature is not enabled, an 
error tone sounds and screen options remains displayed.)Conditions 
for executive override are as follows:

•  Calling station has class of service that enables busy override.
•  Calling station is switched to override voice path.
•  Called party may respond and will be heard by calling station 

and outside party.

When the calling party dials the override code, the called party 
receives several tone bursts.

The executive advisory tone allows installers to configure the system 
to provide an audible tone whenever you activate the executive 
override feature. installers can select this tone as either a one time 
tone or as a periodic reoccurring tone. If installers choose a reoc-
curring tone, they must also select the time interval between the reoc-
curring tones.

Содержание DXP Digital Communications System















































































































































































Отзывы:

Нет отзывов