manualshive.com logo in svg

Comdial DXP Digital Communications System, Инструкция для обслуживающего персонала, Страница: 47 / 174

Поделиться
Скачать
Comdial DXP Digital Communications System Скачать руководство пользователя страница 47

GCA70250

Attendant Manual

August, 03

Comdial

37

3.5  Sending Subdued Off-Hook Voice 

Announcements (SOHVA)

You can make a private voice announcement to another station that is 
off-hook and busy on a call if the installer has arranged the system to 
provide this feature. With SOHVA, the announcement is delivered 
and responded to in a subdued manner that prevents the distant party 
from hearing either the announcement or the response.  A tone alert 
precedes the announcement and is delivered to the handset receiver of 
the telephone ahead of the announcement. 

•  Make a SOHVA 

announcement using the 
SOHVA button as follows:

1.  MAKE intercom call AND HEAR 

busy tone. If called station is on out-
side line, ring-back tone is heard, but 
SOHVA is still available.

2.  SELECT  SOHVA AND HEAR several quick tone bursts.
3.  MAKE announcement (busy tone means that the called telephone is in 

speakerphone mode and you cannot make announcement, that your 
SOHVA has been denied through system programming, or that the 
called party has blocked your SOHVA).

4.  WAIT on line for reply (either verbal 

or LCD reply).

The receiving station can respond to the 
announcement in a verbal or non-verbal 
manner. They affect a verbal response 
by pressing and holding the MUTE 
button or appropriate interactive button 
and speaking into the handset.  They 
effect non-verbal response by pressing a programmed button to send a 
message to be shown on the display of the announcing station (if it is 
an LCD speakerphone).  The announcing station is automatically dis-
connected after the response message is displayed.

J Doe Ext 321 Is Busy

SOHVA

CAMP

NEXT

Making a SOHVA

I Will Call Back

 12

Wed    

10:42    

Receiving an LCD Reply

Содержание DXP Digital Communications System















































































































































































Отзывы:

Нет отзывов