manualshive.com logo in svg

Comdial DXP Digital Communications System, Инструкция для обслуживающего персонала, Страница: 149 / 174

Поделиться
Скачать
Comdial DXP Digital Communications System Скачать руководство пользователя страница 149

GCA70250

Attendant Manaul

August, 03

Comdial

139

Speakerphone User Guidelines

•  Both parties can not talk at the same time. You must wait for 

silence out of your loudspeaker before talking. You must stop 
talking to hear the other party.

•  Background noise may prevent the sound-activated switches 

from operating properly. Avoid placing the speakerphone where 
it will detect sounds from typewriters, keyboards, printers, 
paging systems, and other equipment.

•  Speak slightly louder than normal and with a clear, authoritative 

voice. For the microphone to best detect your voice, speak 
within three feet of it and face the telephone.

•  Raising the volume of the loudspeaker makes it easier for the 

sound-activated switches in your telephone to select the distant 
party’s voice. Lowering the volume of the loudspeaker makes it 
easier for the switches to select your voice.

•  Since the system takes several seconds to provide the best 

switching, constant sound patterns—such as elongating your 
words and playing externally-supplied music—may prevent the 
sound-activated switches from operating properly.

•  Place the telephone on a hard surface and away from table 

edges. Do not place the telephone in corners or enclosures. Do 
not let obstructions come between you and the microphone. 
Rooms with hard, flat surfaces that reflect sound may affect the 
sound-activated switches.

•  If you are using a handset and the other party is using a 

speakerphone, avoid breathing heavily into your microphone. 
Avoid other sounds that may affect the distant telephone’s 
sound-activated switches.

Содержание DXP Digital Communications System















































































































































































Отзывы:

Нет отзывов