Comdial DXP Digital Communications System Скачать руководство пользователя страница 13

Страница: 13 / 174

GCA70250

Attendant Manual

August, 03

Comdial

3. When the telephone is at the desired height,

SELECT

the closest pair

of notches

AND INSERT

the supporting arms in the notches.

PRESS

DOWN

slightly

on the telephone until you feel the supporting arms

snap into place.

Also remember, as with any piece of electronic equipment, your tele-
phone may be damaged by contact with liquids. So please try to place
the telephone in an area that is free from the danger of spills.

1.1.2 SETTING DISPLAY CONTRAST

You can darken or lighten the contrast of the display for best viewing.

• To adjust the display contrast,

1. SELECT

OPTIONS

2. SELECT

NEXT

until the DISP

option appears.

3. SELECT

DISP

. Your display will

read CONTRAST LEVEL.

4. SELECT

LIGHT

DARK

once for

each degree of change desired.

5. SELECT

PREV

to return to main

display.

6. PRESS

SPEAKER

to end.

Note

For more tips and information on speakerphone use,

including the use of a Full-Duplex Speakerphone, see Appendix
C, Speakerphone Characteristics.

Select Display

Setting the Contrast Level

Содержание DXP Digital Communications System















































































































































































Результаты поиска

Содержание DXP Digital Communications System

Отзывы:

Comdial DXP Digital Communications System, Инструкция для обслуживающего персонала, Страница: 13 / 174

Результаты поиска

Содержание DXP Digital Communications System

Отзывы: