manualshive.com logo in svg

Comdial DIGITECH, Системное руководство, Страница: 8 / 218

Поделиться
Скачать
Comdial DIGITECH Скачать руководство пользователя страница 8

CHAPTER 

1

SYSTEM OVERVIEW

System Overview

SECTION 1

INTRODUCTION

The digital telephone system is an expandable
communications system with many attractive
characteristics including the following:

Unitized base unit which includes all system
features. 

The base unit is full featured and

self-contained.

Expansion modules which increase station and
line capacity. 

A 

 8-station expansion module is

available. It can be added singly or in pairs to
increase the station and line capacity of an existing
base unit installation.

Secure off-hook voice announce (SOHVA) feature.

The SOHVA feature allows a station user to talk to a
busy station without being heard by the outside party
at the busy station. The called user can easily send
back a pre-programmed LCD message or talk to the
caller without being heard by the outside party.

Programmable buttons. 

Many of the telephone

buttons can be programmed to provide functions such
as direct station selection (DSS), auto dial, system

feature access, line access, messaging and more.

Programmed buttons helps station users eliminate
manual dialing errors.

Service 

observing. 

Supervisors can help insure

quality of service without interrupting calls by

monitoring a trainee’s call without being heard by the
distant party at the trainee’s station.

Handset volume control on all stations. 

Handset

volume can be set to a comfortable listening level for
each individual user of the telephone.

Call cost display. 

Built-in software records all

outside call costs. Special programming allows an

LCD speakerphone to display the accumulating cost of

a call.

Dual intercom. 

A second intercom key can be

provided so that station users can handle two intercom

calls at once. One intercom call can be placed on

hold while a second intercom call is serviced or both

calls can be 

 together.

Содержание DIGITECH



























































































































































































































Отзывы:

Нет отзывов