manualshive.com logo in svg

Comdial DIGITECH, Системное руководство

Comdial DIGITECH - современная цифровая телефонная система с богатым функционалом. Скачайте бесплатно Руководство по системе с manualshive.com, чтобы лучше понимать функции и возможности данного продукта. Удобный и понятный manual поможет вам оптимально использовать вашу систему.

Поделиться
Скачать
background image

 Of System Features

off hook. Prime line pickup may be pre-empted by
preselecting another line before lifting the handset. 
the prime line is ringing, 

 is automatically answered by

lifting the handset. Prime line automatic is assigned 
a station through station class of service programming.

PRIVACY   DESIGNATED

PROGRAMMABLE 

Stations can be programmed to provide a privacy
button. If a line is private, a user can press the privacy
button to change it into a non-private one. If the line is
non-private, pressing the button will have no effect.

Station class of service programming is used to
program the programmable button function at the
stations.

PRIVACY RELEASE/

BROKERAGE SERVICE

See the discussion titled: 

Privacy   Designated

Programmable button

PRIVATE LINES (ACCESS DENIED)

See the discussion titled: 

Access Denied.

PROGRAMMABLE DSS/BLF

(DIRECT STATION SELECTION/BUSY

LIGHT FIELD)

A station user can store one-button, direct station

selection (DSS) at any memory button location to

create a DSS memory button. When this button is

pressed, any active outside call is automatically placed
on hold and an intercom call is automatically made to
that previously stored station number. The visual

indicators of the stations programmed at the button
locations form a busy lamp field 

 The BLF

conveys station status to the user. An 

 number

can also be programmed as a secondary function at
every 

 memory location. No class of 

is required. 

 refer to the discussion titled: 

Tone 

Voice 

 (intercom).

PROGRAMMABLE 

Refer to the discussions titled: 

Programmability 

 Programmable 

and Dedicated Programmable buttons.

PULSE/TONE SWITCHABLE

The system can be programmed on a per line basis 

allow the stations to switch from pulse to DTMF type
dialing as needed. Aftemately, the system can be
programmed to only allow tone dialing. The line class
of service programming sets the dialing mode required
for a particular line.

RESPONSE MESSAGING

This feature allows a user to reply in a non-verbal

manner to a voice announce or tone-signalled
intercom call or to a secure off -hook voice announce
call if the intercom caller is using an LCD
speakerphone. A station user can press a
programmable button in response to an intercom call

and 

send a message to be shown on the display of the

calling station. Response messages are
pre-programmed by the attendant and later stored by
station users at programmable buttons on their
individual stations as need dictates.

REMOTE PROGRAMMING

AND ADMINISTRATION

Both remote class of service programming and the

transmission of SMDR data for printing are available
through serial data ports. The system supports X-on

X-off terminal control codes as well as a DTR signal for
handshaking. The system data communications
operates per the popular XMODEM protocol. The
database can be uploaded or downloaded, error free,

from or to a remote computer that is running software
that supports the XMODEM protocol. The two serial

data ports allow VDT programming (either local or

remote) to be conducted through one port at the same

time that the other port is being used to send SMDR
data for printing. VDT programming of the system is

menu driven.

RINGING LINE PREFERENCE

The system can be programmed on a per station basis
to provide ringing line preference on all lines

programmed for ringing at the station.

When ringing line preference is enabled at a station,
taking the handset off-hook automatically connects the
station to any outside line that is ringing at it. A line
button will not have to be pressed. 

 a station also  has

prime  line assigned, the prime line will 

 be

answered first even though it may be the second line

to ring. The 

 of a particular station to  answer  a

ringing line without line selection is enabled by the
station class of service programming.

SAVED NUMBER 

This feature enables a button action to save the first 16
digits of the last number manually dialed from the

buttonpad. The saved number can be redialed at a
later time. The saved number is permanently available

for later use until it is replaced with a new number.

SECURE OFF-HOOK VOICE ANNOUNCE

  the secure off-hook voice announce  (SOHVA)

feature, a  secure announcement  can be made from
one station to another station that is off-hook and busy

Содержание DIGITECH



























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DIGITECH

Unify OpenStage 15 Manual preview
OpenStage 15
Бренд: Unify Страницы: 19
3Com NBX 1105 Telephone Manual preview
NBX 1105
Бренд: 3Com Страницы: 98
Panasonic KX-TGD890C Operating Instructions Manual preview
KX-TGD890C
Бренд: Panasonic Страницы: 72
Panasonic KX-TGF943 Operating Instructions Manual preview
KX-TGF943
Бренд: Panasonic Страницы: 80
Jabra SPEAK410 User Manual preview
SPEAK410
Бренд: Jabra Страницы: 7
C&TT WCS-211 User Manual preview
WCS-211
Бренд: C&TT Страницы: 19
Uniden EXI7246B Guía De Referencia Rápida preview
EXI7246B
Бренд: Uniden Страницы: 48
golmar T-740 Plus Quick Manual preview
T-740 Plus
Бренд: golmar Страницы: 2
Amplicomms BigTel 40plus User Manual preview
BigTel 40plus
Бренд: Amplicomms Страницы: 51
Clas Ohlson 38-8610 User Manual preview
38-8610
Бренд: Clas Ohlson Страницы: 2
Furuno FS-2570 Technical Information preview
FS-2570
Бренд: Furuno Страницы: 67
Chronos Telecom RevolutionPBX Installation Manual preview
RevolutionPBX
Бренд: Chronos Telecom Страницы: 38
Blaupunkt DT 01 Quick User Manual preview
DT 01
Бренд: Blaupunkt Страницы: 17
Uniden DECT 160 (French) Manual D'Utilisation preview
DECT 160
Бренд: Uniden Страницы: 60
Panasonic 940P User Manual preview
940P
Бренд: Panasonic Страницы: 26
Panasonic 900 MHz User Manual preview
900 MHz
Бренд: Panasonic Страницы: 26
Panasonic 545X03001 User Manual preview
545X03001
Бренд: Panasonic Страницы: 26
Panasonic 96NKX-TGA277 Operating Instructions Manual preview
96NKX-TGA277
Бренд: Panasonic Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды