Page 9 of 15
Do-Not-Disturb Mode –
When you leave your station for an extended period of time and want another extension to handle
your calls, use off-duty or do-not-disturb mode. To use:
1. Press OPTIONS
2. Press NEXT
3. Press DND
4. Press ON
5. Press SPEAKER.
To cancel, follow the first 3 of the preceding steps, then press OFF and SPEAKER. When a call
comes through to your phone while Do-Not-Disturb mode is on, the INTERCOM light will flash and
the station attempting to call will be displayed in on the LCD. Pick up the call if desired. If you do
answer, when you hang up the call, you will be in Do-Not-Disturb mode until you cancel it.
Wrap-Up Mode –
Wrap-Up Mode is useful when you need time to complete paperwork after making a call and would
like to have another extension receive your calls. To Use, Press HOLD and then the pre-
programmed DND feature button (see programming instructions). To return to normal mode,
repeat.
Paging -
For Systems Equipped with an external paging unit:
1. Lift the handset
2. Press INTERCOM
3. Dial the extension number of the station programmed for paging (see programming
information) or press a preprogrammed paging button, or dial INTERCOM 89 for the special
paging port
4. Make your announcement and hang up.
For Systems Equipped with all-call or zone paging (announcement is made over
telephone speakers) –
1. Lift the handset
2. Press INTERCOM
3. Dial “87” for all call or press INTERCOM and preprogrammed zone buttons or 84, 85 or 86
(zones 1-3) and make the announcement
4. Stay on the line if you are awaiting a reply (“meet-me” page)
5. Hang up to end.
Reply to a “Meet-Me” Page
Lift the handset on any phone, press ITCM, dial 99 to be connected to the paging caller.
Volume Control
Volume Control utilizes the multipurpose control, which sets the volume of the ringer, the speaker,
the handset and the group listening volume. Your LCD will show the new setting. Default levels
will resume after the call is disconnected. See “Set Default Volume Levels” below.
Ringer Volume –
While your extension is idle, press the VOLUME UP or DOWN button to adjust. There are 4 levels,
and depending on programming, there may be a ringer off level as well.
Speaker Volume –
