CombiSteel 7486.0055, Руководство пользователя

Страница: 3 / 22

3
www.combisteel.com
1. General Information
The Food Display Counter is a universal appliance for exposition and short-term storage of various kinds of foods
in lower temperatures. It ensures prolonged freshness and enables longer storage. The Counter is illuminated
and the lamps provide special light structure and enhance the attractiveness of displayed products.
The Counter has two cooled useful compartments:
- a glassed compartment for displaying foods, and
- a compartment for storing foods.
Temperature in the compartment ranges from +1°C to +10°C.
The appliance has been awarded the “Certificate allowing the manufacturer to label its product with the safety
mark” by the PREDOM-OBR Research & Development Center and at the same time comply with standard PN-EN
60335-2-89:2003 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for
commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor”
at the ambient temperature of 25°C±1°C and humidity of 60%±5%.
2. Technical Characteristic
Body of the Food Display Counter is made of galvanized steel sheet that is powder lacquered, or of stainless-steel
sheet, and placed on a shape steel footing. The inside lining is made of sheet aluminium or acid-resistant sheet.
The body is insulated with a layer of foamed polyurethane.
In the bottom part of the appliance there is an energy-saving refrigerating unit with its automatic control unit.
The appliance's operation is based on a single-stage compressor refrigerating cycle.
The appliance is protected from negative impact of lightning strokes by means of a grounding system. The Food
Display Counter must be connected to a grounded socket only.
Note: Manufacturer reserves the right to modify the constructional solutions and apply different subassemblies
that on no account will influence the appliance's parameters.
3. Electrical installation
The Food Display Counter should be supplied from a separate low-voltage circuit. The electrical installation is
provided with a lightning protection system applying the grounding solutions .
Prior to starting the appliance make sure the supply voltage is adequate and complies with the refrigerating unit's
voltage. Ensure an adequate 10 A fuse-element has been installed in front of the plug.
The electrical installation must be performed by an authorized electrician. Following any repairs or overhauls
ensure the electrical connections are made in compliance with the enclosed circuit diagram.
4. Appliance's operation
4.1. Locating and installing the unit
The Food Display Counter should operate in a place that provides good air circulation and is free from direct
sunlight, away from any heat sources, and it should be placed so to provide direct access to the plug of the feeder
cable.
Ensure that the inlet and outlet openings in the refrigerating unit's chamber (perforations in the lower part of
the FDC) are never blanked off so that to provide a free air circulation to cool the refrigerating unit.
If the Food Display Counter is appropriately leveled, it is possible to obtain noise free operation and proper
outflow of water when the Counter is defrosted. The appliance must be connected to a grounded socket, see
Section 3.