Combilift Ltd.
C4000-C5000XL O&S Manual
2-7
C4000-OM-EN-08
Seat Adjustment
It is the responsibility of the Operator to ensure that
the seat is adjusted according to operator weight,
height etc before operating the truck.
ALWAYS report any malfunctioning of the seat
adjustments immediately.
ALWAYS wear the seat belt provided.
DO NOT adjust the seat when vehicle is in operation.
Keep clear of moving parts.
Authorised & competent personnel should carry out
Installation & Maintenance only
A Upstop Adjustment
B Height Adjustment – Depending on operator
weight, rotate knob clockwise, to increase, and
anti-clockwise to reduce suspension stiffness.
C Using the height adjustment knob ‘B’, adjust
the yellow ride indicator ‘C’ to the middle of the
green area when seated.
D Backrest angle adjustment
E Seat belt
F Horizontal Adjustment (Slide rails)
H Backrest Extension
I Lumbar Support adjustment (5 positions)
Mast Height Cutout Override Button
This optional feature uses a push button switch, which is
connected to a sensor on high-lift Triplex masts.
When the mast is above 3.5m (138”)
high, the machine
will not drive.
To re-commence driving the operator must either:
Lower the forks of the machine using the lift
control lever
OR
Press the mast drive enable button located on
the dash.
Red
Red
Green
https://www.forkliftpdfmanuals.com/
