Combi ANGEL WAGON AW Series, Инструкция по эксплуатации и руководство по осмотру, Страница: 24 / 32

Combi ANGEL WAGON AW Series Instruction Manual and Inspection Manual
Box-end
wrench
Hex key
Cap nut
Belt
cover
Hex socket
bolt fixing the
belt cover
Round
protruding part
at the center of
the seat
Superpose the
holes on both end
of the belt
Guard front cover
Guard
Guard
front
cover
Pass the belt
here
Pass the belt through the guard
front cover.
Pass both end of the belt through the holes
on the seat, and superpose the belt holes and
the protruding part at the center of the seat.
Assemble the belt cover to the seat and secure it with a hex
socket bolt (a new belt cover fixing bolt with threadlocker on
it) and a cap nut (reuse it).
Assemble the lock base to
the guard front cover.
Be sure to use the new hex socket bolt supplied
in the belt replacement kit to fix the belt cover.
Caution
Installation
*The illustration shows AW3(forward facing type). The changing procedure of AW4 series is the same.
1
6 7
3
Pass both end of the belt through the
holes on the guard, and assemble the
guard front cover to the guard.
4
Belt
Screws at the
back of the
guard
Phillips screwdriver
Screw the four screws at the
back of the guard (reuse the
same screws).
5
Guard front
cover
Guard front
cover
Release button axis
Release
button
Release
button
Lock base
Lock base
Lock base
While pressing the release button (green), pass the belt through the hole in
the lock base (white).
2
Belt
Belt
Belt
Note: Pass the belt on each sides of the
release button axis. Do not pass
two belts on one side.
The upper and lower sides of the belt cover are different.
The belt cover cannot be assembled with the wrong orientation.
Warning
l
The child may fall or another accident may occur if the belt is not
securely assembled. Be sure to securely assemble the belt.
l
Check that the belt is not twisted.
23