IM-NT-2.3
Operator Guide ©ComAp
– January 2018
21
IM-NT-2.3 Operator Guide.pdf
Lang sel xxx A
0 1 0 1 0 1 0 1
Lang sel xxx B
0 0 1 1 0 0 1 1
Lang sel xxx C
0 0 0 0 1 1 1 1
How to Change the Display Contrast?
Press and hold ENTER and use
or
to adjust the best display contrast.
Hint:
Available from the MEASUREMENT screens only.
How to Check the Serial Number and the Software Revision?
Hold down ENTER and press ESC. On the display you can see the controller INFO screen for 10
seconds.
IM-NT-MGCB
Controller INFO screen contains:
1. Controller name (see
Basic settings
group)
2. Firmware and release date
3. Controller serial number (8 character
number)
4. Application: MGCB
Using
you can view the INFO2 screen which
contains:
5. DispCTRL: Display Software Version
6. IDch: ID string
7. Dgnl: connected dongle
8. Serial number: Controller Serial Number
9. Pwd.dec.: Password Decode Number
Hint:
Available from the MEASUREMENT screens only.
How to View Codepages?
Press
button when you are in Info screen to see codepages.
How to Change the Display Backlight Intensity?
1. Hold down ENTER and then press ESC. On the display you can see Controller INFO screen
for 10 seconds.
2. Press and hold ENTER when in INFO screen and use
or
to adjust the best display
backlight.
Backlight intensity is set for one of the two modes, depending on the activity of configurable binary
input
Alt brightness
(IG-NT/EE and modifications). For IG-Display module, this binary input is located
in the Power connector and it’s function is fixed (not configurable).
Hint:
Backlight intensity change is available from the MEASUREMENT screens only.
How to Find Active Alarms?
1. Select Alarmlist menu item and press ENTER or press
in MEASUREMENT IO or in
MEASUREMENT CU menu.
Inverted alarms are still active. Non-inverted alarms are not active, but not yet confirmed.
2. Press FAULT RESET to accept all alarms.
