IM-NT-2.3
Operator Guide ©ComAp
– January 2018
10
IM-NT-2.3 Operator Guide.pdf
How to View the Alarm List?
1. Select the ALARMLIST menu item.
2. Press ENTER or press
in measurements’ screens to go directly to the Alarm list.
How to View Measured Data?
1. Select the MEASUREMENT CU menu item and press ENTER.
2. Use
and
to select the screen with requested data.
How to View IO Values?
1. Select the MEASUREMENT IO menu item and press ENTER.
2. Use
and
to select the screen with requested data.
How to View the History Menu?
1. Select HISTORY menu item and press ENTER.
2. Use
or
to select a requested record.
3. Use
or
to cycle forward/backward through columns of the record.
How to View and Edit Setpoints?
1. Select SETPOINTS menu item and press ENTER.
2. Use
or
to select requested setpoints group.
3. Press ENTER to confirm.
4. Use
or
to select requested setpoint.
5. Setpoints marked
are password protected.
6. Press ENTER to edit.
7. Use
or
to modify the setpoint. When
or
is pressed for 2 sec, auto repeat function and
speedup is activated. Use
or
to change the setpoint value by 5% of it’s range.
8. Press ENTER to confirm or ESC to leave without change.
9. Press ESC to leave selected setpoints group.
How to Change the Password?
1. Select USERS/PASSWORD menu item and press ENTER.
2. Use
or
to select User.
3. Press ENTER to confirm.
4. Select ChangePassword and press ENTER.
5. Use
or
or
or
to set new password.
6. Press ENTER to confirm password.
How to Set the Language?
1. Select the LANGUAGE menu item (if not already selected) and press ENTER.
2. Use
or
to select a requested Language.
3. Press ENTER to confirm.
Hint:
If binary inputs
Lang sel int A,B,C
(for IG-NT/EE internal display) or
Lang sel #2 A,B,C
(for IG-Display)
are used, it is
not
possible to change languages from Language screen.
Language
0
1
2
3
4
5
6
7
Lang sel xxx A
0 1 0 1 0 1 0 1
Lang sel xxx B
0 0 1 1 0 0 1 1
Lang sel xxx C
0 0 0 0 1 1 1 1
How to Change the Display Contrast?
Press and hold ENTER and use
or
to adjust the best display contrast.
