InteliATS
NT
PWR, SW version 1.0, ©ComAp – March 2009
13
IA-NT- PWR-1.0-Reference Guide R1.pdf
IL-NT RD Remote display software
IL-NT RD is remote display software for a controller. Remote display provides the same control and
monitoring functions as controller itself. Remote display for IA-NT controllers uses standard IA-NT
controller with IL-NT Remote display software. No further programing of the display is required – unit
is self configurable from the main controller. It is connected with the controller via IL-NT-RS232
communication modules using RS232 line. Longer distances (up to 1200m) are possible using IL-NT-
RS232-485 communication module or when RS232/RS485 converters are used.
The IL-NT RD hardware type should fit to the master IA-NT.
N
OTE
:
Please see the “IL-NT-RD Remote display software” chapter for more details.
IB-Lite Communication module
IB-Lite is optional plug-in card to enable InteliATS
NT
communication via Ethernet/Internet. Card inserts
into expansion slot back on the controller.
To insert the module, please follow the instructions for IL-NT RS232 module, procedure is analogous.
You must open the cover first (use screwdriver to open) and then insert the module into slot. Once you
have inserted it, part of the module will remain over plastic box. It is supposed to be used as a service
tool. When you need to remove it, grab module in cutouts and pull it up manually.
See IB-Lite-Reference Guide for further details.
Programming of IA-NT controller
Programming is possible only in OFF mode when the engine is not running.
N
OTE
:
For more information on programing, see LiteEdit Reference Guide.
C
AUTION
!
Check the statistic values after firmware upgrade. Readjust the values if necessary.
