Columbus step 110, Руководство по эксплуатации, Страница: 21 / 36

step 110
21
3.14 Emptying the dirty-water tanks
(see Fig. 12 Remove dirty water tank and Fig. 13: Insert dirty water tank)

Set key switch (5) to "0" position.

Draw the dirty-water tank (21) forward and set down onto the side plate (19).

Put in the suction tubes into the hose bracket (18)

Remove tank lid (28) and put it to the side.

Grip tank on the carrying-troughs and dispose of dirty water according to the relevant
environment regulations.
All valid regulations regarding waste water must be strictly observed when the
dirty water is being dumped!

Place dirty-water tank (21) onto the side plate (19) and insertion area.

Replace tank cover (28).

Adapt the suction tubes (take care of the coorect fitting; the tubes have to be adapted
so that the do not cross each other!)

Shove in tank (21) and check secure mounting.

Set key switch (5) to position "1".

Start suction with START/STOP key (9).

Check fitting of tank cover (28)!

Switch off suction with START/STOP key (9).

The work can now be continued.
Figure 12 Remove dirty water tank
21
28
19
18