Columbus McKinnon Yale ERGO 360, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 10 / 64

10 COLUMBUS McKINNON
Lifting the load
Pull the rerwardpawl rod lever along its axis backwards and tilt to position "↑". Make sure that
the lever will click exactly into place.
Operate hand lever with pumping action. If work is stopped while the hoist is still under load,
the pawl rod lever must remain in the lifting position "↑".
Lowering the load
Pull the rerwardpawl rod lever along its axis backwards and tilt to position "↓". Make sure that
the lever will click exactly into place.
Operate hand lever with pumping action.
Brake jamming
lf a hoist, which is under load, is suddenly relieved of load pressure, e.g. by lifting off the load or
when pulling down walls, and lowering has not been initiated first, the brake will remain locked.
The brake will also lock if the load hook with the bottom block is pulled too tightly against the
housing.
Releasing the jammed brake
Turn pawl rod lever to the lowering position "↓" and operate hand lever with a vigorous stroke.
lf the brake is jammed on extremely tight, it can be released by striking the hand lever.
Yale overload protection device (optional)
The overload protection device is set to approx. 25% (±15%) overload. Its adjustment must
only be carried out by a competent person.
When the load limit is exceeded, the overload protection device is activated and prevents
further lifting of the load, lowering is still possible.