background image

 

Your Spirit™ Adjustable Positioning System (APS)™ Child 
Restraint has been built to the highest standards of quality 
to ensure years of superior service. Please take the time to 
read this informative instruction guide and pay particular 
attention to the safety information provided.  
 

Your child’s safety is of the utmost importance, so we 
urge you to carefully and completely READ ALL the in-
structions.  

 
The proper use of a child restraint, combined with careful 
driving, can lower a child’s risk of injury or death in a crash. 
Please ensure that your child restraint is correctly installed 
by reading and following the instructions.  
 
If you require additional assistance, please call Columbia 
Medical Customer Service at 

(800) 454-6612

, or e-mail 

[email protected]

 

 

Thank you for choosing Columbia Medical.  

ATTENTION 

• 

Use this child restraint in the forward-facing position 
only. 

• 

The recommended location for this child restraint is in 
the rear center seat.  

• 

This child restraint must be used in forward facing vehi-
cle seats only. 

• 

Visit “www.safekidsworldwide.org” to find the nearest 
child restraint safety check point, or ask your local high-
way patrol office for assistance. 

IMPORTANT 

Содержание Spirit APS 2400





























Отзывы: