Columbia Spirit APS 2400, Инструкция по эксплуатации

Страница: 19 / 28

19
Adjusting the Chest Retainer Clip
The chest retainer clip keeps the shoulder straps of the harness from slid-
ing down off the shoulders.
Note: The correct height for the chest retainer clip is at the middle of the
chest - level with the armpit.
1. The chest retainer clip is fastened by
fitting the two halves together. The
chest retainer clip is properly secured
only when a click is heard.
2. Place the chest retainer clip in the
proper location (level with the armpit)
by sliding it up or down the harness
straps.
3. To unfasten the chest retainer clip, simply squeeze the top and bot-
tom tabs in the center, then pull the two halves apart.
Adjusting Padded Head Supports
The Spirit™ APS™ Child Restraint comes standard with adjustable soft-
padded head supports.
1. Locate the plastic buckle and squeeze the top and bottom tabs, then
pull buckle apart.
2. Adjust the height of the head support by inserting each end of the
black strap into any of the unused harness slots that correspond to
the vertical position of the user’s head. Snap buckle to close.
3. To adjust the strap, pull on loose end until desired fit is achieved.
Adjusting Seat Recline
The child restraint can be adjusted to a reclined
position using the optional recline bar.
1. Locate the holes in the lower rear of the child
restraint (see right).
2. Insert the ends of the recline bar into the
holes.
Note: The bottom of the child restraint
should be flat on the vehicle seat when in-
stalled.
3. Place and secure the child restraint into the
vehicle as outlined in pages 10 through 16.
Adjusting the Child Restraint
(continued)
Insertion holes for recline bar
Recline bar