SC Scanner Instruction Manual
Page 7 of 23
9. WARNING: Gently lift the
Main Board Cover to reveal
the Mains Connector.
Release the Mains Connector
from the Main Board.
NOTE: Care needs to be taken with the
Suppressor leads on the Main Board cover as
they can be broken with repeated or excessive
movement.
10. Remove the Main Board
Cover and store in a safe
place.
11. The Main Board cover for the
SC25 is different than for the
SC36 & 24, but should be
removed in the same way as
shown here.
12. Gently lift the locking bar on
each ribbon cable connector.
Don’t use too much force,
which could break the
connector.
