SC Scanner Instruction Manual
Page 15 of 23
38. Rotate and locate the Control
Board Bracket Assembly to
the pencil lines marked out
before, then refit the 4 x M3
screws to hold the Control
Board Bracket Assembly to
the Lid Assembly.
39. Fit the Control Board Bracket
Cover and make sure all the
cables are in the cut out.
40. Refit the 4 x M3 screws to
hold the Control Board
Bracket Cover to the Lid
Assembly.
41. Re-insert the CIS Ribbon
cables into J1 - J3 on the
Main Board, making sure the
locking plate is up before
inserting them.
