Planning for Installation
Unpacking
The Color Ray Receiver and Remote Control is shipped assembled with no additional
assembly needed—they are shipped in separate packages.
Any optional accessories are included in the package. Use the packing list located on
the outside of the box to ensure all accessories are included.
Survey the unit to make sure the units are all intact—not cracked or damaged. Any
damages to the package or its contents are of the buyer’s responsibility; please follow
protocol for filing damage claims. Please recycle or appropriately discard of any
packing materials.
Preparation
Before Installation, Coloronix suggests:
•
Consulting the provided submittal drawings to recognize layouts of luminaries,
power supplies, and wiring layouts.
•
Drawing out a layout plan consisting of locations of luminaries and wiring.
•
Record DMX addresses on a mapping grid for easy reference and addressing
(where applicable).
•
An electrical inspector reviews all wiring plans.
Points to Consider About Data
•
Use a Belden 9481 or similar cable for DMX data connectivity or Plenum rated
CAT5 8-wire cable.
•
AC Power and DATA cables may NOT run in the same conduit due to possible
induced errors.
Page 6—Coloronix Color Ray Manual V1.0