Summary
Introduction
Color changing fixtures are active, top-of-the-line color changing fixtures. They draw on
solid-state elements in order to produce highlights and washes in architectural spaces.
When installed and operated according to this manual, these fixtures will operate
safely and dependably for their rated lifespan.
A Color Ray Signal from the internal stand-alone controller or external controller can
be used as well.
Scope
The purpose of this manual is to properly install and use Color Ray Receiver and
Remote Control at peak performance
.
This manual must be complimented by additional references, consultation from
qualified professional(s), and observance of state and local codes and regulations. This
rule applies to any interior structure, exterior structure, or environment.
Therefore, it is important to:
“read and comply with all instructions and warnings in this
manual when installing or using this product.”
Who Is This Manual Intended for?
This manual is intended for electrical contractors, electrical engineers, and licensed
electricians.
Additional Supplies
The following tools are necessary to install the dimmer:
•
Slotted/Phillips Screwdriver
•
Pliers
•
Cutters
•
Electrical Tape
•
Pencil
•
Ruler
Page 4—Coloronix Color Ray Manual V1.0