Colorjet Vulcan Prime, Руководство пользователя

Страница: 14 / 47

Page 13 of 46
Vulcan Prime
Step 2 : Unwind the media roll to reach near the platen and hold it.
Step 3 : Insert the taken-out media between the platform and the pinch roller.
Step 4: Pull the media out in front of the machine.
Step 5 : Holding the media firmly and push down the Media Lever.
Step 6 : Install the media clamps from both ends.
Step 7 : Pull the enough media so that it reaches to the Take Up roller (or let the media down by issuing the Print
command).
Step 8 : Paste the front edge of the media on the Core.
Step 9: Move the media forward so that it rolls easily over the Core.
Now, the media gets loaded.
Note : Before issuing the Print command, verify the following things:
•
Check the Waste Bottle and empty it, if required.
•
Check the ink level in main tanks and refill it, if required.
The Media Path is shown in the image below:
Fig 12: Displaying the Media Path
Supply
Rollers
Take-up
Rollers
Pinch Roller