COLO COLO-660, Руководство по эксплуатации

Страница: 11 / 13

11
CLEANING
A. Hopper
1. Remove fluidizing AIR LINE
2. Remove injector
3. take our suction pipe
4. wipe the electric line , AIR HOSE .and powder hose cleanly with cloth
5. wipe the suction pipe clean
6. empty the remaining powder from hopper
7. clean the hopper s inner wall ,especially the bottom part , with vacuum cleaner
8. wipe the hoppers inner surface with clean cloth
9. replace the hopper to the original postion
CAUTION: the hopper must not be filled with powder unit work begins , Above all , the hopper s inner
surface must not be cleaned with thinner or water
B. Manual powder Electrostatic GUN
Rountine cleaning of GUN ensures trouble –free operation and normal function at all times.
Daily clearning
1. Remove the powder hose from gun
2. remove nozzle from GUN and clean it
3. Clean the gun s powder outlet with AIR along the direction of its flow
4. clean the gun s body with AIR
5. Assemble it
C. Spray Nozzle
Dairly cleaning
----clean the outer surface of nozzle with compressed air (Do not use thinner or other liquild for
clieaning)
…Clean the nozzle s inside with compressed air after removing it . The powder accumulated in the GUN
must be removed.
….check if the nozzle is worn down
Check if the compressed air s oil and moisture are completely removed
D .Injector
1. Disconnecting powder hose
2. Remove sleece holder
3. Clean sleeve and inside of injector body.