Collomix VIROneo VIBA X.30, Сервисное меню

Страница: 16 / 21

Service Menu VIBA X.30
2021-05-05 Seite 16/21
5.6 SET CLAMP PAR
SET CLAMP PAR
900
F-RUN ENDPOS ICC
Setting of parameter for the clamping mechanism.
F-RUN = TEST FREERUN
ENDPOS = Mixing unit end stop
ICC = Clamp Control
5.6.1 TEST FREERUN
TEST FREERUN
min
0
410mm
actual
0000
10000
max
0
CLOSE OPEN
The function of the clamping motor is tested in the TEST FREERUN
submenu
CLOSE = Close mixing unit
OPEN = Open mixing unit
The clamping motor runs for the amount of time the key is held
down. The minimum, current and maximum performance of the
mixing unit is shown in the display info area. This is a good indicator
of the degree of soiling of the spindles.
The current opening of the mixing unit, displayed in mm, together
with the actual value of the rotary encoder are provided as
additional information.