Collomix GmbH
Shaker
VIBA X.30
D-85080 Gaimersheim
Version 1.0-20
11
5.4
Trial run
A trial run with an empty mixing container must be conducted when first starting the machine or
after maintenance and repair work in order to check the proper function of the machine.
WARNING
Risk of injury due to protruding parts
Parts may protrude from the equipment.
•
Always work diligently on the equipment and in close proximity of the equipment.
•
If the machine is not used, close the door and turn it off on the main switch.
5.5
Transport
The equipment has two transport rollers (10) on the front side of the housing. These transport
rollers allow to move the machine over short distances in an ergonomically user-friendly manner.
The door must be opened for the machine to be handled safely during transport. Secure the opened
door with the hand against swinging.
5.6
Attach transport lock
The lashing strap must be inserted into machine during every transport of the machine otherwise
the swinging mixing unit could damage the machine. Therefore, you need to keep the lashing strap
for a later transport of the machine.
Thread the end of the strap
into the shaft until the strap is
tight.
Tension the strap with the
lever until the mixing unit
reaches the lower limit stop.
Move the lever into the
locked position until the
slider is engaged.
Front attachment
Rear attachment
