Collomix AGIA 200, Инструкция по эксплуатации

Страница: 14 / 20

Shaker AGIA 200, VIBA 300 & VIBA 330 Collomix GmbH
D-85080 Gaimersheim
14
Version G 1.4-16
7. Errors and Troubleshooting
The troubleshooting tables in this Chapter will help you to determine whether you can troubleshoot yourself or whether you need to call
customer service.
IMPORTANT
Jot down the serial number of the machine and the error code from the display before you call customer service. The machine's serial
number is on the type plate.
7.1 Possible errors
Fault Description Machine condition Solutions
E010 Door open
• Door open • Close door
• Door closed • Check the door lock
• Check the power cord / plug to the door lock.
E020 EMERGENCY STOP
activated
• EMERGENCY STOP button pushed • EMERGENCY STOP button released
• EMERGENCY STOP button not
pushed
• Check the switch of the EMERGENCY STOP button
•
Check the power cord / plug to the EMERGENCY STOP
button.
E025 Door unlocked
• Door does not engage • Check door motor
• Door engages • Check the micro-switch of the door lock
E030 Did not find the
container
• No mixing container is placed • Place mixing container
• Mixing container is placed • The mixing container is too small
E050 Defective container
• Container is defect • Container is unstable
• Check clamping pressure, if necessary adjust
E150 Error clamp motor
• The mixing container is not
clamped
• Check the clamp motor
• Check the lines to the clamp motor
• Check the control
E160 Error rotary decoder
• The mixing unit does not clamp • Check clamp motor
•
Check the lines to the clamp motor
• Check the control
•
The mixing unit clamps
•
Check the control
E170 Error door lock
• Close door completely
• Check the door lock
• Check the connection of the door lock
•
Check door motor
E180 Door is not open
•
The door is not open
•
Open door with the DOOR button
•
The mixing container is clamped
•
Check the door lock
• Check the connection of the door lock
• Check door motor
E190 Fuse triggered
• Turn the machine off and wait one minute until the
fuse can be pushed in again.
The grey highlighted services can only be carried out by trained technicians.