ENGL
IS
H
6
Before initial use
Thoroughly clean all parts before using the blender for the first time.
Refer to the
Care and maintenance
section.
Assembly
1. Prevent unintended starts by pulling out the plug from the mains before attaching
the blade assembly and glass jug to the motor unit. Check that the function
selector is in the
0
position.
2. Place the glass jug onto the motor unit. Line the
symbol up with the
▲
symbol.
3. To lock the glass jug in place, twist it clockwise until the
▲
symbol
lines up with
the symbol.
4. Fit the lid onto the glass jug.
Operating instructions
Plug the mains lead into an electrical socket
and switch the completely assembled
blender on by turning the function selector
to an appropriate setting for the contents
of the jug:
• P – The pulse setting only runs as
long as the selector is held on the
P
mark. Adapt the length of pulse to
the consistency of the jug’s contents.
This setting can be used for crushing
ice or items requiring a lot of power.
• 0 – Off
• 1 – 5 – Lowest to highest speed.
Turn the function selector to
0
and unplug
the blender after use.
Important:
• Never run the blender for more than 3 minutes at a time. Let the motor cool down
for a few minutes before using it again.
• Never run the blender empty.
• If frozen ingredients are to be blended, they must be blended immediately after
they have been placed in the jug. Otherwise there is a risk that the ingredients will
freeze together and jam the blades.
• Do not fill the jug with hot liquid as the pressure build-up in the blender can be too high.
• Never shake the glass jug while using the blender. If ingredients get stuck on
the sides of the jug, shut off the blender and use a spatula etc. Do not start
the blender again before you have properly replaced the lid.
• The glass jug can withstand contents having temperatures of up to 60 °C.
Do not subject the glass jug to sudden changes in temperature as this might
cause the glass to crack.
Содержание BL9221
Страница 2: ......